Record Power BS400 Bandsaw archive

Tuesday 14 August 2012

Paul Hannaby looks at this high quality medium bandsaw from Record Power


The bandsaw comes with a cast iron table, 110mm high fence and mitre guide. The cast iron wheels are dynamically balanced for vibration-free operation. One nice feature is the blade tensioner cam lever. The blade can be de-tensioned by throwing the lever and re-tensioned by throwing it back to the tensioned position. This also helps speed up blade changes if a similar blade to the one being removed is being fitted.

The BS400 is the largest of the Record Power range but still within the capabilities of the standard domestic 13 amp supply. Both upper and lower wheel doors have interlock switches to prevent operation of the saw while any of the doors are open. The table tilt is operated with a rack and pinion for ease of adjustment.

In use

The hand wheels for adjusting the belt tension, guide height and belt tension were all easy to use and much better than a small knob. The window in the top door showing the blade tension indicator for different widths of blade is also a useful feature.

Both upper and lower blade guides feature a pair of roller guides and a thrust bearing. It was relatively easy to adjust the upper guides but the lower guides were awkward to get to with the blade guards in place. The locking screw for the lower thrust bearing adjustment was difficult to loosen with the standard Allen key supplied. Perhaps a longer 'T' handled Allen key would make this easier.

One interesting anomaly was that the ruler scale started at 4mm instead of zero. I checked with Record to see if this was a fault and their reply was that this is how they are made. I was also told this was to make allowance for the set on a coarse pitch blade but I'm afraid that didn't make a lot of sense to me, as the coarsest pitch blade I could find still only had a set of less than 1mm each side. I bought a stick-on scale which started at zero and stuck that one on myself! This allowed me to use the ruler scale to measure the thickness of wood I was cutting off so in my view, a much more useful arrangement.


The 305mm depth of cut makes this an ideal saw for the hobby user who needs to process slightly larger blanks and the 2hp motor provides plenty of power for the blade. The problem with the ruler scale, although only a minor issue, was a little baffling. When using the mitre fence it is apparent that it doesn't really come that close to the blade even when at 90° and when at 45° the gap is considerable. I tried a rip cut with a 255mm deep bowl blank and the saw cut through it with ease.

Woodworkers Institute

Tagged In:

Paul Hannaby , Record Power BS400 Bandsaw


Throat depth: 416mm
Maximum depth of cut: 305mm
Motor power output power: 2hp (input 2,000W)
Blade width: 6-25mm
Weight: 140kg
Speeds: Two speeds for wood and plastic
Saw table tilt: -10-45 degrees
Price: £899.99 (includes Alan Holtham’s Bandsaw Masterclass DVD - RRP £17.99)

Where To Buy

Contact: Record Power
Tel: 01246 561 520

Pros & Cons

Generally easy to use
Blade tensioner cam lever
Scale starts at 4mm

5 Star Rating

Versatility: 4/5
Performance: 4/5
Ease of use: 4/5