Print Page | Close Window

Live Centre for a Union Graduate

Printed From: Woodworkers Institute
Category: Furniture & Cabinetmaking
Forum Name: Tools & Equipment
Forum Description: Just got a new plane and want to tell everyone?
URL: http://www.woodworkersinstitute.com/forum/forum_posts.asp?TID=22284
Printed Date: 17 Nov 2019 at 1:55pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Live Centre for a Union Graduate
Posted By: GoldfingerFactory
Subject: Live Centre for a Union Graduate
Date Posted: 12 Sep 2019 at 6:25pm
Hi all,

We've got the old bird up and running with a variable speed controller and it's great to get started.

One thing is that it has a very blunt dead centre and it's causing some issues, one of my makers has suggested trying to find a live centre that would work with it.

Any of the union graduate masters on here able to offer some advice?

Many thanks

Alex


-------------
Turning Waste into Gold



Replies:
Posted By: ron.d
Date Posted: 12 Sep 2019 at 7:17pm
Looking at tyour request for a live centre or your Graduate, the one you asked about in the next post is a 2MT and any live centre with 2MT will fit. Nearly all manfacureres use them
Ron


-------------
Keep turning

web site http://bsewoodturningclub.onesuffolk.net



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net