Print Page | Close Window

Turn gouge over

Printed From: Woodworkers Institute
Category: Woodcarving
Forum Name: Practical Tips For Carvers
Forum Description: Post your top tips here!
URL: http://www.woodworkersinstitute.com/forum/forum_posts.asp?TID=21537
Printed Date: 20 Aug 2019 at 10:33am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Turn gouge over
Posted By: Ralmaroad
Subject: Turn gouge over
Date Posted: 22 Aug 2017 at 12:16am
So many carvers often ignore the fact that a gouge has two (2) positions:  the unique bend of the gouge cutting a concave curve trench in the material AND turned upside down making a convex curve or astragal.  Easily accomplished with an inside bevel on gouges as well as flat chisels.


-------------
We are merely gleaners of all that we have seen.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net