Monday 17 November 2008
John Berkeley turns this ideal Christmas gift
Spinning tops have been known to man since around 2000BC, however, the origin of the top is a subject of much debate and cannot be resolved with any certainty. Through the ages they have been made of rock, ceramic, metal, wood, paper and, more recently, plastics. Designs have varied from crudely hewn stone, to square and hexagonal, to perfectly turned round tops, and they have been found all over the world. They have been the subject of much pleasure to both young and old alike and even today, they are the centre of fierce competition among members of the many spinning clubs worldwide.
Collectable itemsTops are items that are widely collected due to the large variety of types and shapes. As turners, we have the perfect opportunity to try out a large number of these, not only for our own pleasure in turning them, but also as they make very acceptable gifts, even in our modern society.
Whilst not the most simple of twirlers, this whirling dervish design will hopefully stimulate enough interest in spinning tops
to encourage turners to have a go. It is not difficult to make. A friend suggested the name "Pirouetting Doll" which I think suits it well.
As may be obvious when spun, the arms extend due to centrifugal force in a manner similar to the system used in the governor of an engine. I have chosen Boxwood (Buxus) for this doll as it is clean and close-grained. The simple decoration shows up clearly, however, it can be made in other woods and can, if you are of an artistic bent, be painted most attractively.
Safety firstAll woodturning needs common sense precautions for your own safety. When employing the tips listed below I always wear my Aircap, as well as using a dust extractor, as new lungs are very hard to come by. Also, when using the mini drill to mark the eyes and drill the holes for the wires, note how it is safer to clasp your wrists firmly to your stomach (this is easier if your stomach is like mine!) in order to give maximum support to the drill and the object held in your hands. It is all too easy for the tip of the burr to slip and bury itself in you fingers. It is also very simple for it to skate across the surface, potentially ruining all the hard work it has taken to get this far. A slight slip may just be visible on one of the eyes of my dervish. It is not essential to use this means of drilling though but I find it the simplest and quickest.
A useful source of information for spinning tops is a book called The Top by DW Gould in which you will find, amongst many other useful facts, a bibliography of 367 other sources of information - I did say there was a lot of interest in spinning tops!